Honda 79110-SS0-A01 Core, Heater

You can Select Your Vehicle to check if 79110-SS0-A01 fits your vehicle.

Verify the engine coolant level, topping off and bleeding the air from the cooling system if it is low. Check for leaks and ensure the engine coolant operating temperature is within specification. If it is below specification, investigate a potentially damaged or stuck thermostat.

Take your vehicle to an approved facility and discharge the A/C system. Record your vehicle's radio anti-theft code, disconnect the negative battery cable, and let the engine cool if coolant temperature is above 100F. From under the hood, locate the heater control valve on the lower passenger's side firewall area, turn it to the open position, and ensure it's in the full hot position. Drain the engine coolant, remove the heater control valve, place a drain pan below the heater hoses at the firewall, and remove them. Take off the nut attached to the stud through the firewall, then remove the dashboard assembly, heater duct, and heater unit from the firewall. Remove screws and bracket, then take the heater core out of the housing.