Honda 51306-STX-A12 Bush, Stabilizer Holder

You can Select Your Vehicle to check if 51306-STX-A12 fits your vehicle.

To replace bushings and links, loosen the front wheel lug nuts and raise the vehicle with jack stands. Remove the wheels and the bolts from the Sway Bar Bushing retainers. Remove the nuts attaching the Sway Bar Link to the strut/coil spring assembly and Sway Bar Kit. Detach the links, holding the stud with an Allen wrench if needed. Inspect the retainer bushings for damage and replace if needed. If the ball studs on the links are worn, replace the links. Install new links and retainer bushings, lubricating them with vegetable oil. Install the retainers and bolts, tighten to the specified torque, and reinstall the wheels. Lower the vehicle and tighten the lug nuts. For a 2007 Acura MDX, the Sway Bar Kit can be removed without removing the sub frame. For other models, a body repair shop should remove the sub frame.

The need to remove the stabilizer bar from the vehicle is usually due to damage from an accident.

Remove the bolts from the stabilizer bar bushing retainers and detach the retainers from the bushings, prying them off if necessary.