How do I remove the rear hub/bearing assembly on a Honda Ridgeline?

To remove the hub/bearing assembly on a 2007 Acura MDX, loosen the drive axle/hub nut and wheel lug nuts. Raise the vehicle's rear and support it on jack stands. Remove the wheel, brake caliper, bracket, and disc. Discard the drive axle/hub nut. Remove the four hub/bearing assembly mounting bolts and the assembly. If the drive axle sticks, use a two-jaw puller. For installation, ensure the mounting surface and drive axle splines are smooth. Lubricate the splines with grease and install the assembly onto the axle and into the knuckle. Install the assembly-to-knuckle bolts in a criss-cross pattern. Install a new drive axle/hub nut, brake disc, bracket, and caliper. Install the wheel and lug nuts, lower the vehicle, and tighten the axle/hub nut and lug nuts.

Genuine Honda Ridgeline Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Hubs found

View related parts
Honda Ridgeline Bearing Assembly, Rear Hub
Part Number: 42200-T6Z-A01
$161.86 MSRP: $230.57
You Save: $68.71 (30%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing, Hub Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (AWD), 4 Door RTS (AWD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Hub Assembly, Front
Part Number: 44600-T6Z-A00
$149.47 MSRP: $212.92
You Save: $63.45 (30%)
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Hub Assembly, Rear
Part Number: 42210-SJC-A00
$250.79 MSRP: $357.25
You Save: $106.46 (30%)
ADD TO CART
Product Specifications
- Other Name: Rear Hub; Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Bearing Assembly, Rear Hub
Part Number: 42200-TJZ-A01
$160.63 MSRP: $228.81
You Save: $68.18 (30%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing, Hub Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2020 Honda Ridgeline | 4 Door RT (2WD), 4 Door RTL (2WD), 4 Door RTS (2WD), 4 Door Sport (2WD) | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Hub Assembly, Front
Part Number: 44600-SJC-305
Product Specifications
- Other Name: Front Hub; Hub
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT

Honda Ridgeline Wheel Hub Parts Questions & Experts Answers

Hub Assembly, Rear
42210-SJC-A00
Q: How do I remove the rear hub/bearing assembly on a Honda Ridgeline?
A: To remove the hub/bearing assembly on a 2007 Acura MDX, loosen the drive axle/hub nut and wheel lug nuts. Raise the vehicle's rear and support it on jack stands. Remove the wheel, brake caliper, bracket, and disc. Discard the drive axle/hub nut. Remove the four hub/bearing assembly mounting bolts and the assembly. If the drive axle sticks, use a two-jaw puller. For installation, ensure the mounting surface and drive axle splines are smooth. Lubricate the splines with grease and install the assembly onto the axle and into the knuckle. Install the assembly-to-knuckle bolts in a criss-cross pattern. Install a new drive axle/hub nut, brake disc, bracket, and caliper. Install the wheel and lug nuts, lower the vehicle, and tighten the axle/hub nut and lug nuts.