How do you replace the front stabilizer bar,bushings and links on your Honda Ridgeline?

To replace bushings and links, loosen the front wheel lug nuts and raise the vehicle with jack stands. Remove the wheels and the bolts from the Sway Bar Bushing retainers. Remove the nuts attaching the Sway Bar Link to the strut/coil spring assembly and Sway Bar Kit. Detach the links, holding the stud with an Allen wrench if needed. Inspect the retainer bushings for damage and replace if needed. If the ball studs on the links are worn, replace the links. Install new links and retainer bushings, lubricating them with vegetable oil. Install the retainers and bolts, tighten to the specified torque, and reinstall the wheels. Lower the vehicle and tighten the lug nuts. For a 2007 Acura MDX, the Sway Bar Kit can be removed without removing the sub frame. For other models, a body repair shop should remove the sub frame.

Genuine Honda Ridgeline Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
Honda Ridgeline Spring, Rear Stabilizer
Part Number: 52300-SJC-A02
$72.95 MSRP: $103.03
You Save: $30.08 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar
- Position: Rear
- Replaces: 52300-SJC-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Spring, Front Stabilizer
Part Number: 51300-TG7-A01
$99.60 MSRP: $140.68
You Save: $41.08 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Spring, Rear Stabilizer
Part Number: 52300-TJZ-A01
$102.13 MSRP: $144.26
You Save: $42.13 (30%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2020 Honda Ridgeline | 4 Door RT (2WD), 4 Door RTL (2WD), 4 Door RTS (2WD), 4 Door Sport (2WD) | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Spring, Front Stabilizer
Part Number: 51300-SJC-A02
$92.30 MSRP: $130.37
You Save: $38.07 (30%)
Product Specifications
- Other Name: Stabilizer Bar
- Position: Front
- Replaces: 51300-SJC-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Spring, Rear Stabilizer
Part Number: 52300-T6Z-A01
$102.13 MSRP: $144.26
You Save: $42.13 (30%)
Product Specifications
- Other Name: Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (AWD), 4 Door RTS (AWD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT

Honda Ridgeline Sway Bar Kit

The manufacture of Honda Ridgeline comes equipped with the Sway Bar Kit which contributes to the improved body stability during cornering or when be traversing rough terrains. This anti-roll bar links opposite wheels by a torsion spring which in turns increases the roll stiffness without changing the vertical stiffness spring. Through its ability to counteract torsion the Sway Bar Kit facilitates the wheels to come to a roughly similar height to counter the effects of lateral tilt in order to get better grip on the tarmac. It could be that in many years of manufacturing Hondas Ridgeline models they have used styles of Sway Bar Kit like the adjustable and active Sway Bar Kit that can alter the stiffer to allow the premier handling. These highly developed systems help improve ride comfort and stability especially when driving under demanding conditions. However, it is also necessary to point out that Sway Bar Kits also can transfer bumps from one wheel to another and provide a car driver with a'waddling' experience while off-road.

In search of affordable OEM Honda Ridgeline Sway Bar Kit? Consider browsing through our extensive inventory of genuine Honda Ridgeline Sway Bar Kit. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline Sway Bar Kit Parts Questions & Experts Answers

Spring, Front Stabilizer
51300-SJC-A02
Q: How do you replace the front stabilizer bar,bushings and links on your Honda Ridgeline?
A: To replace bushings and links, loosen the front wheel lug nuts and raise the vehicle with jack stands. Remove the wheels and the bolts from the Sway Bar Bushing retainers. Remove the nuts attaching the Sway Bar Link to the strut/coil spring assembly and Sway Bar Kit. Detach the links, holding the stud with an Allen wrench if needed. Inspect the retainer bushings for damage and replace if needed. If the ball studs on the links are worn, replace the links. Install new links and retainer bushings, lubricating them with vegetable oil. Install the retainers and bolts, tighten to the specified torque, and reinstall the wheels. Lower the vehicle and tighten the lug nuts. For a 2007 Acura MDX, the Sway Bar Kit can be removed without removing the sub frame. For other models, a body repair shop should remove the sub frame.