Genuine Honda Passport Starter Motor

Honda Passport Starter Motor Parts Questions & Answers

• Starter Assembly (12V 1.2Kw)
  8-97064-553-0
  Q: How to remove the Starter Motor from a Honda Passport?

  A: Detach the cable from the negative terminal of the battery. Raise the vehicle and support it securely on jackstands. Disconnect the Battery Cable and the solenoid connector from the starter motor solenoid. Remove the starter motor mounting bolts and detach the starter from the engine. Lower starter mounting bolt on the 2.2L four-cylinder engine. Upper starter mounting bolt on the 2.2L four-cylinder engine. Disconnect the battery cable and the solenoid lead. Installation is the reverse of removal.
• Starter Reman
  2-91123-000-0
  Q: How Can I Troubleshoot a Starter Motor That Doesn't Turn on Honda Passport?

  A: Make sure the shift lever is in Neutral or Park, the clutch is depressed, the battery is charged and all cables are secure. If the starter motor spins but the engine doesn't turn over, replace the starter motor. If the Starter Solenoid doesn't click, check the starter solenoid circuit. If it cranks the engine slowly, check the battery and terminal connections. To determine the location of excessive resistance, disconnect the Ignition Coil wire and ground it, connect a remote control starter switch and a voltmeter, then actuate the ignition switch.