How to remove and replace Fan Clutch and electric fans for the Honda Passport?

Some of the ways through which a Cooling Fan Assembly failure could be identified are by noise, vibration, or leakage. One way to know if there is bearing play is to "rock" the fan and it should turn freely once cold. If fluid leakage, a spring that appears deformed, or grease coming out from it, consider replacing it. Replace it if the fan easily turns when warm. For belt-driven fans, slacken the belt tension, disconnect the shroud, and withdraw the assembly of the fan itself. On electric fans simply pull off battery connections and unscrew all screws then unplug plug connectors. Apply 12 volts to its power side as you test whether this fan is defective or not functioning at all. Otherwise, replace it with a new one if it doesn't work. For 2.2L models remove battery cable connector, disconnect connector and remove fan with the shroud.

Genuine Honda Passport Fan Clutch

Cooling Fan Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fan Clutches found

View related parts
Honda Passport Clutch, Cooling Fan
Part Number: 8-97080-688-0
$167.66 MSRP: $277.05
You Save: $109.39 (40%)
ADD TO CART
Product Specifications
- Other Name: Fan Clutch; Clutch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1996 Honda Passport | 4 Door DX | KA 5MT, KL 5MT
View related parts
Honda Passport Clutch, Cooling Fan
Part Number: 8-97172-200-2
Product Specifications
- Other Name: Fan Clutch; Clutch
- Replaces: 8-97172-200-0, 8-97172-200-1
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Honda Passport | 4 Door 2EX, 4 Door 2EX-L, 4 Door 2LX, 4 Door 4EX, 4 Door 4EX-L, 4 Door 4LX, 4 Door 4LX-W | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Passport Clutch, Cooling Fan
Part Number: 8-97102-903-0
Product Specifications
- Other Name: Fan Clutch; Clutch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1996 Honda Passport | 4 Door EX (4X4 V6), 4 Door EX-W (4X2 V6), 4 Door EX-W (4X4 V6), 4 Door LX (4X2 V6), 4 Door LX (4X4 V6), 4 Door LX-W (4X4 V6) | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Passport Clutch, Cooling Fan
Part Number: 8-97135-167-0
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1996-1997 Honda Passport | 4 Door EX-W (4X2 V6), 4 Door EX-W (4X4 V6), 4 Door LX (4X2 V6), 4 Door LX (4X4 V6), 4 Door LX-W (4X4 V6) | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Passport Fan Clutch

The Fan Clutch in Honda Passport vehicles is an assemble that controls the speed of the cooling fan that is used in controlling the heat generated by the engine. This thermostatic device allows the fan to freewheel at low temperatures thereby lightening the load on the engine for even and faster warming up. As the engine warms up the clutch potato engages whereby the fan draws air through the radiators for cooling of the engine. Honda Passports employ viscous or fluid couplings for their fan clutch, by the way, functions depending on the temperature and speed of the vehicle's engine. However, they may also be fitted with electronic clutch system that enable the driver to control cooling with far much better accuracy which at the end has an impact in the general performance of the vehicle.

In search of affordable OEM Honda Passport Fan Clutch? Consider browsing through our extensive inventory of genuine Honda Passport Fan Clutch. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Passport Fan Clutch Parts Questions & Experts Answers

Clutch, Cooling Fan
8-97080-688-0
Q: How to remove and replace Fan Clutch and electric fans for the Honda Passport?
A: Some of the ways through which a Cooling Fan Assembly failure could be identified are by noise, vibration, or leakage. One way to know if there is bearing play is to "rock" the fan and it should turn freely once cold. If fluid leakage, a spring that appears deformed, or grease coming out from it, consider replacing it. Replace it if the fan easily turns when warm. For belt-driven fans, slacken the belt tension, disconnect the shroud, and withdraw the assembly of the fan itself. On electric fans simply pull off battery connections and unscrew all screws then unplug plug connectors. Apply 12 volts to its power side as you test whether this fan is defective or not functioning at all. Otherwise, replace it with a new one if it doesn't work. For 2.2L models remove battery cable connector, disconnect connector and remove fan with the shroud.