Genuine Honda Odyssey Antenna Cable

Honda Odyssey Antenna Cable Parts Questions & Answers

• Sub-Feeder
  39159-SHJ-A91
  Q: How to remove the antenna and Cable on Honda Odyssey?

  A: This procedure is valid only for mopar coded mast antennas on units produced up to 2004, as the JPMA antenna is automatically mounted on the right quarter glass on the 2005 models onward. First of all, the antenna mast should be detached from the base employed for its anchoring with the assistance of a wrench. Moving on the next step, take out the antenna nut with an antenna nut wrench then, the mounting base and the last step a rubber weather seal. Next, pop off the right scuff plate and the right kick panel, also right inner fender splash shield can be removed. Remove the bolts of the antenna housing mounting bracket, extract the bracket and the housing and disconnect both by removing the relevant bolts. Last of all, pull out the antenna cable through the hole in the grommet of the car. Installation is the process when the bass speaker is fixed on the body of the amplifier the reverse process of installation.