How Do You Remove and Install an Ignition Coil on Honda Crosstour?

For four-cylinder models, remove the coil cover and disconnect the electrical connector. Remove the mounting bolt, and pull the coil straight up. For V6 models, disconnect the electrical connector, remove the mounting bolt, and pull the coil straight out. Installation is the reverse of removal. Ensure the mounting bolt is tightened to the torque.

Genuine Honda Crosstour Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Coils found

View related parts
Honda Crosstour Coil, Plug Hole
Part Number: 30520-R70-S01
$83.21 MSRP: $117.53
You Save: $34.32 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Coil; Coil
- Replaces: 30520-R70-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Coil Assembly, Plug Ho
Part Number: 30520-5G0-A01
$42.69 MSRP: $60.29
You Save: $17.60 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Coil; Coil
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT
View related parts
Honda Crosstour Coil, Plug Hole
Part Number: 30520-R40-007
$69.96 MSRP: $98.82
You Save: $28.86 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Coil; Coil
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Crosstour | 5 Door EX, 5 Door EX-L | KA 5AT
View related parts
Honda Crosstour Coil, Plug Hole
Part Number: 30520-R70-A01
$83.21 MSRP: $117.53
You Save: $34.32 (30%)
ADD TO CART
Product Specifications
- Replaced by: 30520-R70-S01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT

Honda Crosstour Ignition Coil

Honda Crosstour Ignition Coil is an important part of the automobile that has responsibilities for handling the ignition process of a car. Also, acting as high voltage transformer the ignition coil transforms the low voltage from the battery and produce a high voltage spark to ignite the air /fuel mixture in the engine cylinders. This operation ushers two rings of insulated copper wire, primary and secondary coils, arranged around a compact house made of iron. The primary circuit is the connection with the battery and the triggering device while the secondary circuit embraces the high tension lead and the spark plug wires. For spark plugs, there are the distributor ignition systems and coil-on-plug system in which Crosstour models have been favored over the years despite the kind of ignition system it has, means of applying voltage to spark plugs differ. The ignition coil is also a critical component of every car, and when it goes bad, the engine may start misfiring, exhibit poor performance, and affect the fuel economy of the car.

In search of affordable OEM Honda Crosstour Ignition Coil? Consider browsing through our extensive inventory of genuine Honda Crosstour Ignition Coil. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Ignition Coil Parts Questions & Experts Answers

Coil Assembly, Plug Ho
30520-5G0-A01
Q: How Do You Remove and Install an Ignition Coil on Honda Crosstour?
A: For four-cylinder models, remove the coil cover and disconnect the electrical connector. Remove the mounting bolt, and pull the coil straight up. For V6 models, disconnect the electrical connector, remove the mounting bolt, and pull the coil straight out. Installation is the reverse of removal. Ensure the mounting bolt is tightened to the torque.