How do you replace the blower motor power transistor and blower motor on Honda CR-V?

To replace the blower motor resistor, first disconnect the cable from the negative battery terminal. Then, working in the passenger compartment under the glove box, remove the lower dash panel and the glove box. Next, remove the mounting screws for the passenger's side heater duct and take out the duct. Disconnect the electrical connector from the blower motor resistor and remove the mounting screws to take out the resistor from the blower housing. For installation, reverse the removal steps and reconnect the battery. To replace the blower motor, repeat the initial steps of removing the lower dash panel and glove box, then disconnect the electrical connector from the blower motor and remove its mounting screws to take out the blower motor assembly. Remove the blower motor circlip and take off the blower fan from the motor. Again, installation is the reverse of removal, followed by reconnecting the battery.

Genuine Honda CR-V Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Blower Motor Resistors found

View related parts
Honda CR-V Transistor, Power
Part Number: 79330-TR0-A01
$52.11 MSRP: $73.60
You Save: $21.49 (30%)
ADD TO CART
Product Specifications
- Other Name: Resistor; Transistor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2016 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 5AT, KA CVT
View related parts
Honda CR-V Transistor Assembly, Power
Part Number: 79330-TDJ-J41
$60.76 MSRP: $85.82
You Save: $25.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Resistor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2024 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX, EX-L, Hybrid EX, Hybrid EX-L, Hybrid Sport, Hybrid Sport Touring, Hybrid Sport-L, Hybrid Touring, LX, Special Edition, Touring | KA CVT
View related parts
Honda CR-V Transistor, Power
Part Number: 79330-SNA-A01
$65.56 MSRP: $92.60
You Save: $27.04 (30%)
ADD TO CART
Product Specifications
- Other Name: Transistor; Resistor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2011 Honda CR-V | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE (2WD), 5 Door SE (4WD) | KA 5AT
View related parts
Honda CR-V Transistor, Power
Part Number: 79330-S5A-942
$90.88 MSRP: $128.37
You Save: $37.49 (30%)
ADD TO CART
Product Specifications
- Other Name: Transistor; Resistor
- Replaces: 79330-S7A-941, 79330-S5A-941
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2006 Honda CR-V | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KA 5AT, KA 5MT
View related parts
Honda CR-V Transistor, Power
Part Number: 79330-SCA-A02
$45.45 MSRP: $64.19
You Save: $18.74 (30%)
ADD TO CART
Product Specifications
- Other Name: Transistor; Resistor
- Replaces: 79330-SCA-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2006 Honda CR-V | 5 Door EX, 5 Door EX (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KA 5AT, KA 5MT
View related parts
Honda CR-V Transistor Assembly, Power
Part Number: 79330-S10-A42
$47.57 MSRP: $67.19
You Save: $19.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Transistor; Resistor
- Replaces: 79330-S10-A41
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1997-2001 Honda CR-V | 5 Door EX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda CR-V Blower Motor Resistor

The Blower Motor Resistor in Honda CR-V automobile is a vital component connected with the regulation of the speed of the blower motor that has the responsibility of circulating either heated or cooled air within the car's cabin. This component makes sure that the drivers finds comfort together with the passengers while on a drive. Hoever, different Honda CR-V models apply different Blower Motor Resistors that enable proper regulation of air flow throughout the years. The primary function remains consistent: to regulate the speed of the blower motor Presently, the blower motor's speed can be adjusted by the use of a variable resistor this should be changed with a PWM. The differences may work in the aspect of design or technology but the need to continue with the regulation of the interior climate remains a key feature of all models of Honda CR-V.

In search of affordable OEM Honda CR-V Blower Motor Resistor? Consider browsing through our extensive inventory of genuine Honda CR-V Blower Motor Resistor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda CR-V Blower Motor Resistor Parts Questions & Experts Answers

Transistor, Power
79330-TR0-A01
Q: How do you replace the blower motor power transistor and blower motor on Honda CR-V?
A: To replace the blower motor resistor, first disconnect the cable from the negative battery terminal. Then, working in the passenger compartment under the glove box, remove the lower dash panel and the glove box. Next, remove the mounting screws for the passenger's side heater duct and take out the duct. Disconnect the electrical connector from the blower motor resistor and remove the mounting screws to take out the resistor from the blower housing. For installation, reverse the removal steps and reconnect the battery. To replace the blower motor, repeat the initial steps of removing the lower dash panel and glove box, then disconnect the electrical connector from the blower motor and remove its mounting screws to take out the blower motor assembly. Remove the blower motor circlip and take off the blower fan from the motor. Again, installation is the reverse of removal, followed by reconnecting the battery.