Where is the Master Cylinder Located and How is it Installed on Honda Civic?

The brake master cylinder is located in the engine compartment, mounted to the power brake booster. Begin by removing the air filter housing. Disconnect the electrical connector from the fluid level warning switch. Using a syringe or equivalent, remove the brake fluid from the brake master cylinder reservoir and dispose of it properly, ensuring that brake fluid does not come into contact with painted surfaces as it can cause damage. If spilled, wash immediately with water. Disconnect the electrical connector from the fluid level sensor on the remote reservoir, then remove the remote fluid reservoir mounting bolt. Place rags underneath the fluid fittings and prepare caps or bags to cover the ends of the lines once they're disconnected. Loosen the fittings at the ends of the brake lines entering the brake master cylinder. Using a flare-nut wrench is preferred. Pull the brake lines slightly away from the brake master cylinder and plug the ends. Remove the mounting nuts from the brake master cylinder to detach it from the power booster and then pull it out of the engine compartment. If installing a new brake master cylinder, transfer the reservoir to it. Before installing the new brake master cylinder, bench bleed it by mounting it in a vise. Attach bleeder tubes to the outlet ports and fill the reservoir with brake fluid. Push the pistons into the brake master cylinder until no more air bubbles are present, then remove the bleed tubes and install plugs in the ports. Install a new O-ring on the brake master cylinder and place it over the studs on the power brake booster. Thread the brake line fittings into the brake master cylinder and tighten them. Fill the brake master cylinder reservoir with fluid and bleed it. Attach the remote fluid reservoir, tightening the bolt securely. Reconnect the electrical connector to the fluid level sensor. Reverse the removal process for the remainder of the installation, bleed the entire brake hydraulic system, and test the brake system operation before regular driving.

Genuine Honda Civic Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Brake Master Cylinders found

View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-SNA-A01
$209.61 MSRP: $298.58
You Save: $88.97 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2011 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door SI, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door GX, 4 Door LX, 4 Door LX-S | KA 5AT, KA 5MT, KA 6MT
View related parts
Honda Civic Master Cylinder
Part Number: 46100-S04-A04
$257.26 MSRP: $366.47
You Save: $109.21 (30%)
ADD TO CART
Product Specifications
- Replaces: 46100-S04-A02, 46100-S04-A01, 46100-S04-A03
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1996-2000 Honda Civic | 2 Door DX, 2 Door HX, 3 Door CX, 3 Door DX, 4 Door DX, 4 Door DX-VP, 4 Door GX, 4 Door LX | KA 4AT, KA 5MT, KA CVT, KL 4AT, KL 5MT, KL CVT, KR 5MT, KW 5MT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-SNB-G51
$224.83 MSRP: $320.27
You Save: $95.44 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2011 Honda Civic | 2 Door EX-L, 2 Door SI, 4 Door EX-L, 4 Door SI | KA 5AT, KA 5MT, KA 6MT
View related parts
Honda Civic Master Cylinder A
Part Number: 46100-TBA-A01
$264.24 MSRP: $376.42
You Save: $112.18 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaced by: 46100-TEG-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2021 Honda Civic | 2 Door EX, 2 Door EX (Turbo), 2 Door EX (Turbo/CVT), 2 Door LX, 2 Door LX (CVT), 2 Door Sport, 2 Door Sport (CVT), 2 Door Touring, 2 Door Touring (Turbo), 4 Door EX, 4 Door EX (Turbo), 4 Door EX-A, 4 Door EX-T, 4 Door EX-TA, 4 Door EX-TL, 4 Door EX-TLA, 4 Door LX, 4 Door LX (CVT), 4 Door LX-A, 4 Door SE, 4 Door Sport, 4 Door Sport (CVT), 4 Door Touring, 4 Door Touring (Turbo) | KA CVT, KL CVT
View related parts
Honda Civic Master Cylinder A
Part Number: 46100-TBA-A11
$166.94 MSRP: $237.80
You Save: $70.86 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2020 Honda Civic | 2 Door EX (Turbo/6MT), 2 Door LX (6MT), 2 Door SI, 2 Door Sport, 2 Door Sport (6MT), 4 Door EX (Turbo), 4 Door EX-T, 4 Door LX, 4 Door LX (6MT), 4 Door SI, 4 Door Sport, 4 Door Sport (6MT) | KA 6MT
View related parts
Honda Civic Master Cylinder Set (Coo)
Part Number: 46101-TGG-305
$133.65 MSRP: $190.38
You Save: $56.73 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaces: 46100-TGG-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2021 Honda Civic | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door SE, 5 Door Sport | KA CVT, KL CVT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-S5D-A01
$144.69 MSRP: $204.37
You Save: $59.68 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2001-2005 Honda Civic | 2 Door LX, 4 Door GX, 4 Door LX, 4 Door LX-CAR | KA 4AT, KA 5MT, KA CVT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-S5D-A51
$223.49 MSRP: $318.37
You Save: $94.88 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaces: 46100-S6M-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2001-2005 Honda Civic | 2 Door EX, 4 Door EX, 4 Door GX, 4 Door MX (Hybrid) | KA 4AT, KA 5MT, KA CVT, KL 4AT, KL 5MT, KL CVT
View related parts
Honda Civic Master Cylinder
Part Number: 46100-TX6-A03
$311.91 MSRP: $444.32
You Save: $132.41 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46100-TX6-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Civic | 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door SI, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SI | KA 5AT, KA 5MT, KA 6MT, KA CVT, KL 5AT, KL CVT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-S5D-L01
$158.90 MSRP: $226.35
You Save: $67.45 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2001-2005 Honda Civic | 2 Door DX, 2 Door HX, 2 Door LX, 4 Door DX, 4 Door DX-VP, 4 Door LX | KA 4AT, KA 5MT, KA CVT, KL 4AT, KL 5MT, KL CVT
View related parts
Honda Civic Master Cylinder
Part Number: 46100-TR3-A02
$327.65 MSRP: $466.73
You Save: $139.08 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46100-TR0-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-L, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door GX, 4 Door HF, 4 Door LX, 4 Door LX (AT) | KA 5AT, KA 5MT, KA CVT, KL 5AT, KL CVT
View related parts
Honda Civic Master Cylinder Set
Part Number: 01461-SNC-G00
$320.25 MSRP: $456.20
You Save: $135.95 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaced by: 01461-SNC-G01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2015 Honda Civic | 4 Door MX, 4 Door MX (Hybrid) | KA CVT, KL CVT
View related parts
Honda Civic Dwg
Part Number: 46101-TGH-306
$377.04 MSRP: $537.10
You Save: $160.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2021 Honda Civic | 5 Door Touring LE, 5 Door Type R, 5 Door Type R (Touring) | KA 6MT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-TEG-A01
$264.24 MSRP: $376.42
You Save: $112.18 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaces: 46100-TBA-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2023 Honda Civic | 2 Door EX, 2 Door EX (Turbo), 2 Door EX (Turbo/CVT), 2 Door LX, 2 Door LX (CVT), 2 Door Sport, 2 Door Sport (CVT), 2 Door Touring, 2 Door Touring (Turbo), 4 Door EX, 4 Door EX (Turbo), 4 Door EX-A, 4 Door EX-T, 4 Door EX-TA, 4 Door EX-TL, 4 Door EX-TLA, 4 Door LX, 4 Door LX (CVT), 4 Door LX-A, 4 Door SE, 4 Door Sport, 4 Door Sport (CVT), 4 Door Touring, 4 Door Touring (Turbo), EX, EX-L, LX, Sport, Sport Touring, Touring | KA CVT, KL CVT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-S04-A12
$219.83 MSRP: $313.15
You Save: $93.32 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46100-S04-A14
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1996-1997 Honda Civic | 2 Door EX | KA 4AT, KA 5MT, KL 4AT, KL 5MT, KR 5MT, KW 5MT
View related parts
Honda Civic M/CYL ASSY-, CLUTCH
Part Number: 46920-3K0-H02
$65.07 MSRP: $91.90
You Save: $26.83 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2022-2023 Honda Civic | EX, EX-L, LX, Si, Sport, Sport Touring, Touring
View related parts
Honda Civic Master Cylinder Set
Part Number: 46101-TR0-315
$327.65 MSRP: $466.73
You Save: $139.08 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaces: 46101-TR0-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012 Honda Civic | 4 Door EX, 4 Door LX | KA 5AT, KA 5MT, KL 5AT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-SR3-831
Product Specifications
- Replaced by: 46100-SR3-833
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1992 Honda Civic | 4 Door EX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-SH3-G14
Product Specifications
- Replaced by: 46100-SR3-913
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1989 Honda Civic | 5 Door 4WD | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Civic Master Cylinder Assembly
Part Number: 46100-SH3-A03
Product Specifications
- Replaced by: 46100-SR3-043
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988 Honda Civic | 3 Door DX, 3 Door STD, 4 Door DX, 4 Door LX, 5 Door (Wagovan), 5 Door DX | KA 4AT, KA 4MT, KA 5MT, KL 4AT, KL 4MT, KL 5MT

| Page 1 of 3 |Next >

1-20 of 48 Results

Honda Civic Brake Master Cylinder

The Brake Master Cylinder in Honda Civic automobiles is a vital unit chargeable for transforming the motion of the foot of the driver into hydraulic pressure. This mechanism works through the circulation of the fluid in the system that squeezes the calipers or the drum brakes in pulling the shoes in order to produce the friction that is needed in order to stop the vehicle. Normally, Honda Civics come fitted with dual circuit master cylinders, which are equipped with two opposing pistons, and in case on circuit fails, the car will still be able to brake, thus being safe. A variety of master cylinders have been used in Honda Civics over the years: cast iron and aluminum; the form of the master cylinder reservoir is either built-in or separate. Integral reservoirs tend to be less complex than external ones; however, external ones may be easier to maintain. Some of the problems that affects the Brake Master Cylinder includes leaking fluids, internal problems that affect the performance of the brakes. As with any important component, it is very important to inspect this item on a recurring basis.

In search of affordable OEM Honda Civic Brake Master Cylinder? Consider browsing through our extensive inventory of genuine Honda Civic Brake Master Cylinder. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Civic Brake Master Cylinder Parts Questions & Experts Answers

Master Cylinder Set
01461-SNC-G00
Q: Where is the Master Cylinder Located and How is it Installed on Honda Civic?
A: The brake master cylinder is located in the engine compartment, mounted to the power Brake Booster. Begin by removing the air filter housing. Disconnect the electrical connector from the fluid level warning switch. Using a syringe or equivalent, remove the brake fluid from the brake master cylinder reservoir and dispose of it properly, ensuring that brake fluid does not come into contact with painted surfaces as it can cause damage. If spilled, wash immediately with water. Disconnect the electrical connector from the fluid level sensor on the remote reservoir, then remove the remote fluid reservoir mounting bolt. Place rags underneath the fluid fittings and prepare caps or bags to cover the ends of the lines once they're disconnected. Loosen the fittings at the ends of the Brake Lines entering the brake master cylinder. Using a flare-nut wrench is preferred. Pull the brake lines slightly away from the brake master cylinder and plug the ends. Remove the mounting nuts from the brake master cylinder to detach it from the power booster and then pull it out of the engine compartment. If installing a new brake master cylinder, transfer the reservoir to it. Before installing the new brake master cylinder, bench bleed it by mounting it in a vise. Attach bleeder tubes to the outlet ports and fill the reservoir with brake fluid. Push the pistons into the brake master cylinder until no more air bubbles are present, then remove the bleed tubes and install plugs in the ports. Install a new O-ring on the brake master cylinder and place it over the studs on the power brake booster. Thread the brake line fittings into the brake master cylinder and tighten them. Fill the brake master cylinder reservoir with fluid and bleed it. Attach the remote fluid reservoir, tightening the bolt securely. Reconnect the electrical connector to the fluid level sensor. Reverse the removal process for the remainder of the installation, bleed the entire brake hydraulic system, and test the brake system operation before regular driving.

Related Honda Civic Parts

Browse by Year