How are the camshafts and rocker arm assembly removed and reassembled on the cylinder head on Four cylinder engine on Honda Accord?

The camshaft holders, camshafts, and rocker arm assembly are fixed directly to the head by a number of bolts only and in some engines they can be unbolted as a complete unit on the bench. Starting with the removal of the negative terminal of the battery and, placing the number one piston at TDC. Take off the valve cover and the timing chain after it then slacken all the rocker arm adjusting bolts. The camshaft holder bolts are then to be removed using the correct sequence and then the upper timing chain guide. Lift off the camshaft holders and camshafts, and remove the rocker arm assembly Fig 2, but make sure that each bolt marketed will fit back in the camshaft holder for reassembly. When the intake camshaft sprocket has been replaced it should be secured by sealing the advance and retard holes with the help of tape and the lock should be released with the help of compressed air. For inspection, remove the rocker arm assembly by taking out all the retaining bolts and lay down the various subassemblies in a order where they can be reassembled in the right sequence. Clean the assembly and look for signs of wear and tear and damage them on rocker arm faces, shaft and bearing surfaces. If checking camshaft endplay: install rocker arm assembly and camshafts, then mount a dial indicator and witness the reading as you try to move the camshaft. For camshaft runout, it is necessary to place the camshaft in to V-blocks and turn it it in order to measure runout. Camshaft bearing journals and caps needs to be checked for their wear and tear, the cam lobes for scoring and, for uneven wear, the required parts should be replaced. Some of them involve lubrication and cleanliness so that they don't experience it again in future. For installation, coated all parts, rearranged the rocker arms, and aligned the correct configuration of the camshaft sprocket timing marks. Torque the camshaft holder bolts in the correct order and finish the procedure in the reverse process of what was done earlier, followed by the checking of all valve clearance, and leaks, etc., after the running of the engine.

Genuine Honda Accord Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

67 Rocker Arms found

View related parts
Honda Accord Arm Assembly, Intake Rocker
Part Number: 14620-R71-A01
$117.33 MSRP: $165.72
You Save: $48.39 (30%)
ADD TO CART
Product Specifications
- Other Name: Intake Rocker Arm
- Replaces: 14620-RGW-A00, 14620-RN0-A01, 14620-R70-A02, 14620-R70-A01, 14620-RGW-A01, 14620-RN0-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6 | KA 5AT
- 2008-2009 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KL 5AT
View related parts
Honda Accord Arm Assembly, Intake Rocker
Part Number: 14610-R70-A02
$71.15 MSRP: $100.50
You Save: $29.35 (30%)
ADD TO CART
Product Specifications
- Other Name: Intake Rocker Arm
- Replaces: 14610-R70-A01, 14610-R70-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KL 5AT
View related parts
Honda Accord Arm B Assembly, Exhuast Rocker
Part Number: 14614-R70-A01
$55.90 MSRP: $78.95
You Save: $23.05 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm
- Replaces: 14614-R70-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KA 6MT, KL 5AT, KL 6MT
View related parts
Honda Accord Arm A Assembly, Exhuast Rocker
Part Number: 14612-R70-A01
$55.90 MSRP: $78.95
You Save: $23.05 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm
- Replaces: 14612-R70-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KA 6MT, KL 5AT, KL 6MT
View related parts
Honda Accord Arm B Assembly, Exhuast Rocker
Part Number: 14627-RN0-A00
$202.68 MSRP: $288.72
You Save: $86.04 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm
- Replaces: 14627-R70-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011 Honda Accord | 2 Door EX-L V6 | KA 5AT
- 2008-2009 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KL 5AT
View related parts
Honda Accord Arm Assembly, Exhuast Rocker
Part Number: 14624-RAA-A00
$34.35 MSRP: $48.51
You Save: $14.16 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm, Rocker Arm
- Replaces: 14624-RAD-A00, 14624-PNA-010
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2007 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-SUL, 2 Door LX, 2 Door LX-SUL, 2 Door SE, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Arm Assembly, Rocker
Part Number: 14620-R44-A10
$110.75 MSRP: $156.43
You Save: $45.68 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arms
- Replaced by: 14620-R44-A11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Arm A Assembly, Exhuast Rocker
Part Number: 14624-R71-A00
$98.98 MSRP: $139.80
You Save: $40.82 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm
- Replaces: 14624-RGW-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6 | KA 5AT
View related parts
Honda Accord Arm B Assembly, Exhuast Rocker
Part Number: 14627-R71-A00
$98.98 MSRP: $139.80
You Save: $40.82 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm
- Replaces: 14627-RGW-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6 | KA 5AT
View related parts
Honda Accord Arm Assembly, Exhuast Rocker
Part Number: 14624-R40-A01
$72.46 MSRP: $102.35
You Save: $29.89 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arms; Rocker Arm
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE | KA 5AT, KA 5MT, KL 5MT
View related parts
Honda Accord Arm Assembly, Rocker
Part Number: 14620-RAA-A00
$195.57 MSRP: $278.59
You Save: $83.02 (30%)
ADD TO CART
Product Specifications
- Other Name: Intake Rocker Arm; Rocker Arm
- Replaces: 14620-PNE-000
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2007 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-SUL, 2 Door LX, 2 Door LX-SUL, 2 Door SE, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Arm A Assembly, Exhuast Rocker
Part Number: 14624-RN0-A00
$183.67 MSRP: $261.63
You Save: $77.96 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm
- Replaces: 14624-R70-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011 Honda Accord | 2 Door EX-L V6 | KA 5AT
- 2008-2009 Honda Accord | 2 Door EX-L V6, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV) | KA 5AT, KL 5AT
View related parts
Honda Accord Arm Assembly, Rocker
Part Number: 14620-R44-A11
$110.75 MSRP: $156.43
You Save: $45.68 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arm
- Replaces: 14620-R44-A10
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Arm Assembly, Rocker
Part Number: 14625-RPY-G00
$30.74 MSRP: $43.42
You Save: $12.68 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arms; Rocker Arm
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2022 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door EX-L (2.0), Sport, Touring | KA 6MT, KA XAT
View related parts
Honda Accord Arm Assembly Rocker
Part Number: 14625-59B-000
$33.35 MSRP: $47.10
You Save: $13.75 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arms; Rocker Arm
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door Sport, 4 Door Touring | KA 6MT, KA CVT
View related parts
Honda Accord Arm Assembly, Rocker (Vtec)
Part Number: 14620-RPY-G00
$99.12 MSRP: $140.00
You Save: $40.88 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arm
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2022 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door EX-L (2.0), Sport, Touring | KA 6MT, KA XAT
View related parts
Honda Accord Arm Assembly, Intake Rocker
Part Number: 14620-P8A-A01
$309.92 MSRP: $441.49
You Save: $131.57 (30%)
ADD TO CART
Product Specifications
- Other Name: Intake Rocker Arm; Rocker Arm
- Replaces: 14620-P8A-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2007 Honda Accord | 2 Door EX (V6), 2 Door EX V6, 2 Door EX-V6, 2 Door LX (V6), 2 Door LX V6, 2 Door SE (V6), 4 Door EX (V6), 4 Door EX-V6, 4 Door LX (V6), 4 Door LX V6, 4 Door SE (V6) | KA 4AT, KA 5AT, KL 4AT, KL 5AT
View related parts
Honda Accord Arm A, Exhuast Rocker
Part Number: 14626-P8A-A00
$29.75 MSRP: $42.02
You Save: $12.27 (30%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Rocker Arms; Exhaust Rocker Arm, Rocker Arm
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2007 Honda Accord | 2 Door EX (V6), 2 Door EX V6, 2 Door EX-V6, 2 Door LX (V6), 2 Door LX V6, 2 Door SE (V6), 4 Door EX (V6), 4 Door EX-V6, 4 Door LX (V6), 4 Door LX V6, 4 Door SE (V6) | KA 4AT, KA 5AT, KL 4AT, KL 5AT
View related parts
Honda Accord Arm Assembly, Intake Rocker
Part Number: 14610-5A2-A02
$123.19 MSRP: $175.48
You Save: $52.29 (30%)
ADD TO CART
Product Specifications
- Other Name: Rocker Arm
- Replaces: 14610-5A2-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2017 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door Sport | KA 6MT, KA CVT, KL 6MT, KL CVT
View related parts
Honda Accord Arm Assembly, Intake Rocker
Part Number: 14620-R72-A02
$414.81 MSRP: $598.57
You Save: $183.76 (31%)
ADD TO CART
Product Specifications
- Other Name: Intake Rocker Arm
- Replaces: 14620-R72-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX-L V6 | KA 6MT, KL 6MT

| Page 1 of 4 |Next >

1-20 of 67 Results

Honda Accord Rocker Arm

The Rocker Arm in Honda Accord responds for the variation of movement from the pushrod to the valves of the intake or the exhaust valve. Normally, made of stamped steel with aluminum or fully built of stamped steel, it moves up and down as the pushrod moves vertically to provide sufficient force to lift the valves. In such applications where the engine RPM is high, aluminum is predominant due to light weight nature and cast iron or forged carbon steel for durability purpose in diesel engines. Other types of Rocker Arms like the roller rockers have needle bearings inserted to minimize abrasion and therefore enhance efficiency as opposed to the other types. The rocker ratio can be from 1.5:1 to 1. Some makes of the contemporary Honda Accord engines contain the rocker ratio of 1.8 as well, and it escalates the lift of camshaft and in its turn increases the performance. They are also used for managing new high-RPM levels of stress within the Honda Accord models along with the enhancement of the durability of the actual Rocker Arm system.

In search of affordable OEM Honda Accord Rocker Arm? Consider browsing through our extensive inventory of genuine Honda Accord Rocker Arm. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Accord Rocker Arm Parts Questions & Experts Answers

Arm, Assembly, Rocker
14620-R40-A01
Q: How are the camshafts and rocker arm assembly removed and reassembled on the cylinder head on Four cylinder engine on Honda Accord?
A: The camshaft holders, camshafts, and rocker arm assembly are fixed directly to the head by a number of bolts only and in some engines they can be unbolted as a complete unit on the bench. Starting with the removal of the negative terminal of the battery and, placing the number one piston at TDC. Take off the valve cover and the Timing Chain after it then slacken all the rocker arm adjusting bolts. The camshaft holder bolts are then to be removed using the correct sequence and then the upper timing chain guide. Lift off the camshaft holders and camshafts, and remove the rocker arm assembly Fig 2, but make sure that each bolt marketed will fit back in the camshaft holder for reassembly. When the intake camshaft sprocket has been replaced it should be secured by sealing the advance and retard holes with the help of tape and the lock should be released with the help of compressed air. For inspection, remove the rocker arm assembly by taking out all the retaining bolts and lay down the various subassemblies in a order where they can be reassembled in the right sequence. Clean the assembly and look for signs of wear and tear and damage them on rocker arm faces, shaft and bearing surfaces. If checking camshaft endplay: install rocker arm assembly and camshafts, then mount a dial indicator and witness the reading as you try to move the camshaft. For camshaft runout, it is necessary to place the camshaft in to V-blocks and turn it it in order to measure runout. Camshaft bearing journals and caps needs to be checked for their wear and tear, the cam lobes for scoring and, for uneven wear, the required parts should be replaced. Some of them involve lubrication and cleanliness so that they don't experience it again in future. For installation, coated all parts, rearranged the rocker arms, and aligned the correct configuration of the camshaft sprocket timing marks. Torque the camshaft holder bolts in the correct order and finish the procedure in the reverse process of what was done earlier, followed by the checking of all valve clearance, and leaks, etc., after the running of the engine.