How to remove and install a hood safely and correctly on Honda Accord?

As will be seen when removing and installing the hood, it is recommend that at least two persons do it because of its weight as well as the awkwardness of its dimensions. First of all, it is necessary to cover the fender and cowl panels with blankets or pads to protect them and the body and paint, respectively. Put pencil marks around the bolt heads and the top section of the hood hinges so that they may be easily aligned once more during the auto reassembly process. Remove any cables or wire harnesses that may hamper removal and for V6 models, remove the hood support strut bolted to the hood with emphasis on the metal clip for the 2006 and later models. With some help, bear the weight of the hood and get rid of the hinge to hood bolts before you pull of the hood. During installation, align the hood and ensure that the hinges fit within the scribe marks made earlier; if this has not been done or if the scribe marks are not anymore visible since you are installing a different hood, realign according to the marks made. Fine-tune the relative fore-and-aft and right-and-left positions of the hood by rotating it slightly and observing its movement as the set-screw engages the elongated holes in the hinges; score around the hinge plate to remind you of the adjustment. Turn the bolts and give minor corrections and then tighten the bolt while looking at the alignment. The hood latch assembly is also designed to be slidably mounted up and down as well as from side to side at the upper radiator support to obtain a tight fit flush with the fenders and use of reference lines to reposition the part. Also, rebend the hood at its leading edge and bring down the vertical height of the edge cushions to allow it to blend with the fenders. It is advised that the hood latch assembly and the hinges be lubricated with white lithium-base grease from time to time to reduce sticking and wear.

Genuine Honda Accord Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Hoods found

View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-TA6-A91ZZ
$553.75 MSRP: $824.03
You Save: $270.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-TA6-A00ZZ, 60100-TA5-A00ZZ, 60100-TA5-A91ZZ, 60100-TA5-A90ZZ, 60100-TA6-A90ZZ, 60100-TA0-A90ZZ, 60100-TA0-A91ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Hood Complete (Dot)
Part Number: 60100-T2G-A90ZZ
$574.90 MSRP: $829.58
You Save: $254.68 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-T2A-A00ZZ, 60100-T2G-A00ZZ, 60100-T2A-A90ZZ, 60100-T2A-A80ZZ, 60100-T2A-P00ZZ, 60100-T2F-A90ZZ, 60100-T2F-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door EX-L V6, 4 Door LX, 4 Door Sport, 4 Door Touring (V6) | KA 6AT, KA 6MT, KA CVT, KL 6AT, KL 6MT, KL CVT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-SDB-A90ZZ
$507.40 MSRP: $732.19
You Save: $224.79 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-SDA-A00ZZ, 60100-SDA-A90ZZ, 60100-SDB-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2007 Honda Accord | 4 Door DX, 4 Door EX, 4 Door EX (V6), 4 Door EX-L, 4 Door LX, 4 Door LX (V6), 4 Door SE, 4 Door SE (V6), 4 Door VP | KA 5AT, KA 5MT, KA 6MT, KL 5AT, KL 6MT
View related parts
Honda Accord Hood, Engine
Part Number: 60100-T2F-A10ZZ
$1095.44 MSRP: $1580.71
You Save: $485.27 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2017 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door Sport | KA 6MT, KA CVT, KL CVT
View related parts
Honda Accord Hood (DOT)
Part Number: 60100-T3L-A90ZZ
$483.86 MSRP: $698.21
You Save: $214.35 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-T3L-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2017 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S | KA 6MT, KA CVT, KL 6MT, KL CVT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-T3V-A90ZZ
$671.72 MSRP: $969.31
You Save: $297.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2014 Honda Accord | 4 Door Hybrid | KA CVT
View related parts
Honda Accord Hood (DOT)
Part Number: 60100-SDP-A90ZZ
$496.53 MSRP: $716.50
You Save: $219.97 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-SDN-A90ZZ, 60100-SDP-A00ZZ, 60100-SDN-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2007 Honda Accord | 2 Door EX, 2 Door EX (V6), 2 Door EX V6, 2 Door EX-L, 2 Door EX-SUL, 2 Door EX-V6, 2 Door LX, 2 Door LX (V6), 2 Door LX V6, 2 Door LX-SUL, 2 Door SE, 2 Door SE (V6) | KA 5AT, KA 5MT, KA 6MT, KL 5AT, KL 5MT, KL 6MT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-TA5-A91ZZ
$553.75 MSRP: $824.03
You Save: $270.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaced by: 60100-TA6-A91ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-TA0-A90ZZ
$553.75 MSRP: $824.03
You Save: $270.28 (33%)
ADD TO CART
Product Specifications
- Replaced by: 60100-TA6-A91ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011 Honda Accord | 4 Door LX | KA 5AT
- 2008-2009 Honda Accord | 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV) | KA 5AT, KL 5AT
View related parts
Honda Accord W-HOOD COMP
Part Number: 60100-30A-A00ZZ
$453.28 MSRP: $654.08
You Save: $200.80 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2023-2024 Honda Accord | EX, Hybrid EX-L, Hybrid Sport, Hybrid Sport-L, Hybrid Touring, LX
View related parts
Honda Accord Hood (DOT)
Part Number: 60100-T3M-A90ZZ
$483.86 MSRP: $698.21
You Save: $214.35 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-T3M-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2017 Honda Accord | 2 Door EX-L V6, 2 Door Touring (V6), 2 Door TRN-V6 | KA 6AT, KA 6MT, KL 6AT, KL 6MT
View related parts
Honda Accord Hood, Engine
Part Number: 60100-T2G-A10ZZ
$867.34 MSRP: $1251.57
You Save: $384.23 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2017 Honda Accord | 4 Door EX-L V6, 4 Door Touring (V6) | KA 6AT, KL 6AT
View related parts
Honda Accord Hood Complete (Dot)
Part Number: 60100-T2F-A90ZZ
$574.90 MSRP: $829.58
You Save: $254.68 (31%)
ADD TO CART
Product Specifications
- Replaced by: 60100-T2G-A90ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Accord | 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door Sport | KA 6MT, KA CVT, KL 6MT, KL CVT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-S80-A90ZZ
$519.03 MSRP: $748.97
You Save: $229.94 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-S82-A90ZZ, 60100-S80-A00ZZ, 60100-S82-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Honda Accord | 2 Door EX, 2 Door EX (V6), 2 Door LX, 2 Door LX (V6), 2 Door SE | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Accord Hood, Engine
Part Number: 63110-688-000ZZ
$247.99 MSRP: $353.27
You Save: $105.28 (30%)
ADD TO CART
Product Specifications
- Replaced by: 06630-688-000ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1979-1981 Honda Accord | 3 Door DX, 3 Door LX, 4 Door DX, 4 Door SE | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-TE0-A91ZZ
$801.50 MSRP: $1156.57
You Save: $355.07 (31%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-TE1-A90ZZ, 60100-TE1-A00ZZ, 60100-TE0-A90ZZ, 60100-TE0-A00ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-L V6, 2 Door LX, 2 Door LX-S | KA 5AT, KA 5MT, KA 6MT, KL 5AT, KL 5MT, KL 6MT
View related parts
Honda Accord Hood, Engine
Part Number: 60100-SM4-V50ZZ
$239.34 MSRP: $340.93
You Save: $101.59 (30%)
ADD TO CART
Product Specifications
- Replaced by: 60100-SM4-505ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1990 Honda Accord | 4 Door DX, 4 Door EX, 4 Door LX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Accord Hood, Engine
Part Number: 60100-SV4-010ZZ
$399.28 MSRP: $654.23
You Save: $254.95 (39%)
ADD TO CART
Product Specifications
- Other Name: Hood
- Replaces: 60100-SV4-V50ZZ, 60100-SV4-000ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1995 Honda Accord | 2 Door DX, 2 Door EX, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door LX, 5 Door EX, 5 Door LX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Accord Hood, Engine
Part Number: 63110-688-670ZZ
$247.99 MSRP: $353.27
You Save: $105.28 (30%)
ADD TO CART
Product Specifications
- Replaced by: 06630-688-000ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1980-1981 Honda Accord | 3 Door DX, 3 Door LX, 4 Door DX, 4 Door SE | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Accord Hood, Engine (DOT)
Part Number: 60100-TE0-A90ZZ
$801.50 MSRP: $1156.57
You Save: $355.07 (31%)
ADD TO CART
Product Specifications
- Replaced by: 60100-TE0-A91ZZ
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2009 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-L V6, 2 Door LX, 2 Door LX-S | KA 5AT, KA 5MT, KA 6MT, KL 5AT, KL 5MT, KL 6MT

| Page 1 of 3 |Next >

1-20 of 42 Results

Honda Accord Hood Parts Questions & Experts Answers

Hood (DOT)
60100-SDP-A90ZZ
Q: How to remove and install a hood safely and correctly on Honda Accord?
A: As will be seen when removing and installing the hood, it is recommend that at least two persons do it because of its weight as well as the awkwardness of its dimensions. First of all, it is necessary to cover the Fender and cowl panels with blankets or pads to protect them and the body and paint, respectively. Put pencil marks around the bolt heads and the top section of the Hood Hinges so that they may be easily aligned once more during the auto reassembly process. Remove any cables or wire harnesses that may hamper removal and for V6 models, remove the hood support strut bolted to the hood with emphasis on the metal clip for the 2006 and later models. With some help, bear the weight of the hood and get rid of the hinge to hood bolts before you pull of the hood. During installation, align the hood and ensure that the hinges fit within the scribe marks made earlier; if this has not been done or if the scribe marks are not anymore visible since you are installing a different hood, realign according to the marks made. Fine-tune the relative fore-and-aft and right-and-left positions of the hood by rotating it slightly and observing its movement as the set-screw engages the elongated holes in the hinges; score around the hinge plate to remind you of the adjustment. Turn the bolts and give minor corrections and then tighten the bolt while looking at the alignment. The Hood Latch assembly is also designed to be slidably mounted up and down as well as from side to side at the upper radiator support to obtain a tight fit flush with the fenders and use of reference lines to reposition the part. Also, rebend the hood at its leading edge and bring down the vertical height of the edge cushions to allow it to blend with the fenders. It is advised that the hood latch assembly and the hinges be lubricated with white lithium-base grease from time to time to reduce sticking and wear.