Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2008-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door LX-S, 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2003-2012 Honda Accord | 2 Door EX (V6), 2 Door EX V6, 2 Door EX-L V6, 2 Door EX-V6, 2 Door LX (V6), 2 Door LX V6, 2 Door SE (V6), 4 Door EX (V6), 4 Door EX-L V6, 4 Door EX-V6, 4 Door LX (V6), 4 Door SE (V6) | KA 5AT, KA 6MT, KL 5AT, KL 6MT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2003-2007 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-SUL, 2 Door LX, 2 Door LX-SUL, 2 Door SE, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5AT, KA 5MT, KL 5AT, KL 5MT
Q: how to inspect and replace a serpentine drivebelt for the Honda Accord?
A: The drivebelt snakes through the front of the engine and it powers key components that need a regular inspection of it for any signs of wear. Ensure that you examine the belt itself for cracks, fraying, or glazing, and also ensure that pulleys show no sign of damage. Only where there are deep cracks should the belt be replaced. Further, check if the automatic tensioners' wear indicator marks are within range. For the four-cylinder engines, use a wrench on the tensioner pulley to remove (note its routing), while for V6 engines, just turn the tensioner. Afterward, ensure that the new belt is installed correctly so that it is seated well, and release tensioner. In case you have to replace it, detach the drivebelt and power steering pump (four-cylinder) or two bolts from tensioner (V6).