Honda 17910-SDA-A81 Wire, Throttle

You can Select Your Vehicle to check if 17910-SDA-A81 fits your vehicle.

First remove the engine cover or the two accelerator cable cover bolts and remove the accelerator cable cover from the Accelerator Pedal Position (APP) sensor. Then rotate the throttle lever cam on the throttle body or on the APP sensor until the cable is lined up with the slot in the cam, then disengage the cable from the cam. Loosen the accelerator cable locknut at the cable bracket and disengage the accelerator cable from its bracket. Note the routing of the accelerator cable, then trace the cable from the cable bracket back to the firewall, detaching or disengaging it from any clamps, clips or cable guides. Using a flashlight so that you can see underneath the dash, locate the cable connection at the top of the accelerator pedal, push the upper end of the pedal forward and disengage the cable from the pedal arm. To disengage the accelerator cable from the firewall, remove the two retaining nuts that secure the cable mounting flange to the firewall, then pull the cable through the firewall into the vehicle.