Honda 8-97110-256-0 Valve, Exhuast

You can Select Your Vehicle to check if 8-97110-256-0 fits your vehicle.

This guide doesn't apply to 2.2L four-cylinder engines with hydraulic valve lifters. With the engine cold, remove the air cleaner assembly and valve cover. Ensure rocker arm pedestal retaining nuts are tight. Rotate the crankshaft to bring the number one piston to TDC on the compression stroke. Check and adjust valves on cylinders 1, 2, and 3. Use a feeler gauge to check/adjust intake valve clearance. If adjustment is needed, loosen the adjusting screw locknut, adjust, then tighten. Repeat for other valves. Rotate the crankshaft one full turn clockwise to bring the number 4 piston to TDC. Check and adjust valves on cylinders 2, 3, and 4. Reinstall the valve cover and air cleaner assembly.

The dealer service department or automotive machine shop will perform several tasks, including removing the valves and springs, reconditioning or replacing the valves and valve seats, reconditioning or replacing the valve guides, checking and replacing the valve springs, spring retainers, and keepers as necessary, replacing the valve seals with new ones, reassembling the valve components, and ensuring the installed spring height is correct. They will also resurface the cylinder head gasket surface if it is warped.