Honda 52441-TR0-A62 Spring, Right Rear

You can Select Your Vehicle to check if 52441-TR0-A62 fits your vehicle.

Loosen rear wheel lug nuts, raise the vehicle, and support it securely on jackstands. Block the front wheels and remove the wheel. Place a floor jack under the trailing arm and slowly raise it. Remove the ABS sensor and brake hose bracket, detach the stabilizer bar link, and remove the lower mounting bolt of the shock absorber. Unbolt the upper arm and forward end of the trailing arm. Lower the jack and remove the coil spring. Check for chips/cracks and inspect the spring seat. To reinstall, switch the removal steps going from the final step to the beginning step. Secure the fasteners, wheel and lug nuts. Check/adjust rear wheel alignment.

Slide the rubber bump stop off the damper rod, extend the damper rod to its full length and install the rubber bump stop.