Honda 52300-TA5-A01 Spring, Rear Stabilizer

You can Select Your Vehicle to check if 52300-TA5-A01 fits your vehicle.

Loosen the rear wheel lug nuts, raise the rear of the vehicle, place it securely on jackstands and remove the rear wheels. Remove the stabilizer bar-to-link nuts. Use an Allen wrench to prevent the ballstud from turning when removing the attaching link nut. Unbolt the bushing bracket from each side of the stabilizer bar and then remove the bar. Pull the retainers off the bar and inspect the bushings for cracks, breaks and other signs of deterioration. If the bushings are damaged, replace them. Also check the stabilizer bar links for loose balljoints and other damage, replacing them if necessary. Installation is the reverse of removal. Use new self-locking nuts to attach the stabilizer bar links.

The stabilizer bar should be guided into position and the brackets and bolts should be installed, tightening them securely. The stabilizer bar should then be connected to the links and the nuts should be tightened. New self-locking nuts should be used for attaching the stabilizer bar links.