Honda 8-97139-091-0 Shaft Assembly, Front Drive

You can Select Your Vehicle to check if 8-97139-091-0 fits your vehicle.

Return the driveaxle assembly to the automotive machine shop to have the axle mounting bracket and new seal installed, along with pressing on the bearing, ensuring a new seal is used even if the old bearing is being reused.

No, the removal procedure for these models is generally similar.

If damage occurs to the outer CV joint, the entire driveaxle assembly must be replaced.

Due to the complexity and critical nature of differential adjustments, along with the specialized equipment required, it is advisable for any disassembly of the differential to be performed by a dealer service department or a qualified repair shop.

Remove the rear spring shackle bolts and lower the rear of each leaf spring to the floor.

For Saginaw rear axles, raise the rear of the vehicle, support it securely, and remove the wheel and brake drum. Unscrew the pressed steel cover from the differential housing to drain the lubricant, then remove the lock bolt from the differential pinion shaft and withdraw the pinion shaft. Push the outer end of the axleshaft in to remove the C-lock, then carefully withdraw the axleshaft, avoiding damage to the oil seal. Reinstallation follows the reverse order, with a new lock bolt and cover gasket, and refill the differential with the correct lubricant.