Honda 8-97134-269-0 Shaft, Rear Axle

You can Select Your Vehicle to check if 8-97134-269-0 fits your vehicle.

Two-piece driveshafts with a center bearing feature three U-joints: one at the extension housing companion flange, one behind the center bearing, and one at the differential pinion flange.

For Dana rear axles, begin by loosening the rear wheel lug nuts, raising the vehicle, and securing it on jackstands. Remove the rear drum brake shoes or caliper and disc, disconnect the parking brake cable, and detach the axleshaft bearing retainer by removing four nuts. Use a slide hammer and puller attachment to remove the axleshaft, followed by the brake backing plate. Take the axleshaft and bearing retainer assembly to an automotive machine shop for replacement of the collar, bearing, and seal, then reinstall in reverse order, ensuring proper torque on the bearing retainer and wheel lug nuts.

Disconnect the driveshaft from the rear axle and hang it with a piece of wire from the underbody.

If the CV joints show signs of wear, typically due to torn boots, consider all options before starting the overhaul, as complete rebuilt driveaxles are available on an exchange basis, saving time and effort.