Honda 43022-TA0-A51 Set, Pad Rear

You can Select Your Vehicle to check if 43022-TA0-A51 fits your vehicle.

To replace the rear pads, clean the brake assembly with brake system cleaner. Then, remove the caliper mounting bolts and hang the caliper away from the brake hose with wire. Remove the outer and inner brake pads, inspect and install pad retainer clips, apply grease to shims, and install the new inner and outer pads and shims. Inspect the caliper pin dust boots, retract the piston, ensuring proper alignment with the tab on the inner brake pad, and install the caliper mounting bolts while holding the caliper pins with a second wrench.