Honda 72211-SR2-013 Regulator, Right Front Door Power

You can Select Your Vehicle to check if 72211-SR2-013 fits your vehicle.

Remove the inside door handle, followed by the door trim panel and plastic shield. Next, take out the door window glass. Scribe or mark a line around the roller guide adjusting bolt to ensure proper reassembly before removing the mounting bolts. Remove the window regulator retaining bolts and the two roller guide bolts, then loosen the motor bolts and take out the regulator assembly through the hole in the center of the door. For power window models, unplug the electrical connector. Prior to installation, lubricate all contact surfaces with multi-purpose grease, and the installation process is the reverse of removal. To adjust the glass position evenly in the opening, loosen the roller guide or motor mounting bolts, raise the window as far as possible while ensuring it is centered in its channel, and then securely tighten the roller guide or motor mounting bolts.