Honda 19010-R70-A53 Radiator (Denso)

You can Select Your Vehicle to check if 19010-R70-A53 fits your vehicle.

Disconnect the battery, set the parking brake, and block the wheels. Lift the vehicle and support it firmly on jackstands. Remove the splash shield, drain the cooling system, and remove the radiator cover and fans. Disconnect the lower hose and lines, remove the radiator brackets, and lift out the radiator. Inspect for leaks/damage. Check the mounts, guide it into the mounts, tighten the bolts, and fill the cooling system. Reconnect the battery and start the engine. Check for leaks, allow to reach normal temp, recheck coolant, and add transaxle fluid.

Fill the cooling system with the proper coolant, reconnect the battery, start the engine and check for leaks, allow the engine to reach normal operating temperature, recheck the coolant level and add more if required, check and add transaxle fluid as needed.