Honda 13621-P0A-A01 Pulley, Timing Belt Drive

You can Select Your Vehicle to check if 13621-P0A-A01 fits your vehicle.

The necessary maintenance under Normal operation of the Accord and Prelude models are done when the timing belt is replaced and water pump is inspected every 84 months or 105000 miles (168000 km). The timing belt should be replaced at lesser intervals the extreme heat or cold weather condition affecting the automobile; in this case the belt should be replace every 60,000 miles (100,000 km). In the event that the timing belt will appear to have signs of wear or defects during the previous examinations, this should be replaced as soon as possible. For 2.2L (F22A1) engines turn the negative battery terminal, locate the timing marks, and remove some parts to get access to the timing belt covers. Take out the valve and timing belt covers, lock the timing belt adjuster, loosen tensioners and then, properly taken out the balancer and timing belts. Inoperative, replace the tensioners and seriously think of water pump replacement. When installing ensure that the water pump jeep has been properly sealed, the tensioners put into place and the all the timing marks lined up before proceeding to fasten the adjusters. Similarly perform other related intents for 2.2L (F22B1 and F22B2), 2.2L (H22A1), 2.3L (H23A1), and 2.7L and 3.0L engines making sure that all parts of the engines are well fixed and tightened. Check the timing belt for abrasions, crazing or loss of stiffness and tooth profile, and replace it as necessary or according to the recommended schedule.