Honda 01469-TX7-A01 Power Set, Master

You can Select Your Vehicle to check if 01469-TX7-A01 fits your vehicle.

Disconnect the hose leading from the engine to the booster. Detach the brake lines from the clamp on the cowl. On CR-V models, remove the engine wiring harness clamp bolts and reposition the harness. Locate the pushrod clevis pin connecting the booster to the brake pedal, remove the clevis pin retaining clip with pliers and pull out the pin. Remove the four nuts holding the brake booster to the firewall. Slide the booster straight out from the firewall until the studs clear the holes and pull the booster, brackets and gaskets from the engine compartment area.