Honda 16620-P8E-A00 Pipe, Rear Fuel

You can Select Your Vehicle to check if 16620-P8E-A00 fits your vehicle.

Disconnect the fuel supply hose from the front fuel rail, then remove and discard the old 0-ring. To detach the fuel rail, remove all four mounting bolts: two on the front fuel rail and two on the rear fuel rail. The crossover hose connecting the right ends of the two fuel rails doesn't need to be disconnected to remove the fuel rail and injectors.

To prepare and install new components: 1.Coat the new cushion rings and upper O-rings with clean engine oil and install them on each injector. 2.Insert the fuel strainer into the top of each injector. 3.Coat the new lower O-rings with clean engine oil and install them on the lower ends of the injectors. 4.Coat the outside surface of each upper O-ring and cushion ring with clean engine oil. 5.Insert each injector into its corresponding bore in the fuel rail. 6.Coat each new seal ring with clean engine oil and press it into an injector bore in the intake manifold. 7.Install the injectors and fuel rail assembly on the intake manifold and tighten the fuel rail mounting bolts securely.