Honda 28810-P7W-004 Pick-Up Assembly (Matsushita)

You can Select Your Vehicle to check if 28810-P7W-004 fits your vehicle.

The input shaft speed sensor is situated on the transaxle's front left corner of 2001-2002 Acura and 2003-2005 Honda models. Remove the left front wheel, raise the vehicle, disconnect the electrical connector on the sensor, remove the O-ring and sensor. Reverse the steps when installing with another O-ring. The output shaft speed sensor is located on top of the transaxle. Disconnect its connector, remove the sensor and O-ring, reinstall it using another O-ring. For 2003 and beyond Acuras as well as 2006 and later Hondas, you will locate an input sensor at transaxle's front side. Get rid of engine splash guard to reach there.

The anti-lock brake system consists of three main components: wheel speed sensors, an electronic control unit (ECU), and a hydraulic unit.

For installation, reverse the removal steps, ensuring to use a new O-ring and tighten the sensor mounting bolt to the specified torque.

Finally, reinstall the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.