Honda 61111-SB2-670ZZ Panel, Right Front Fender

You can Select Your Vehicle to check if 61111-SB2-670ZZ fits your vehicle.

Raise and support the front of the vehicle so that it is just off the ground, then remove the tire and wheel assembly. Next, take out the inner fender cover assembly bolts and remove it, followed by the fender mounting bolts. The fender is joined to the body with sealer at some points, so using a small putty knife can help break the seal in these areas. Carefully remove the fender from the vehicle, taking care not to damage the painted surfaces. For installation, apply body sealer (available from Honda) to the correct location and position the fender without tightening the bolts. Check the fender-to-hood-to-door clearance, and once it is correct and even, tighten all mounting bolts. Finally, install the inner fender assembly and its mounting bolts, then reinstall the wheel and tire assembly before lowering the vehicle.