Honda 46101-T0B-315 Master Cylinder Set

You can Select Your Vehicle to check if 46101-T0B-315 fits your vehicle.

If installing a new master cylinder, transfer the reservoir to it. Before installing the new master cylinder, bench bleed it by mounting it in a vise. Attach bleeder tubes to the outlet ports and fill the reservoir with brake fluid. Push the pistons into the master cylinder until no more air bubbles are present, then remove the bleed tubes and install plugs in the ports. Install a new O-ring on the master cylinder and place it over the studs on the power brake booster. Thread the brake line fittings into the master cylinder and tighten them. Fill the master cylinder reservoir with fluid and bleed it. Attach the remote fluid reservoir, tightening the bolt securely. Reconnect the electrical connector to the fluid level sensor. Reverse the removal process for the remainder of the installation, bleed the entire brake hydraulic system, and test the brake system operation before regular driving.