Honda 46100-TK6-A51 Master Cylinder A

You can Select Your Vehicle to check if 46100-TK6-A51 fits your vehicle.

Lift and remove the cowl cover between the wiper arm pivots. Manual transmission models: Remove the bolt from the clutch hydraulic reservoir bracket and position the reservoir to the side. Unplug the electrical connector for the fluid level warning switch. On 2009 and later models, squeeze the clamp and remove the reservoir hose from the master cylinder. Place rags under the fittings and prepare caps or plastic bags to cover the ends of the lines once they're disconnected. Loosen the fittings at the ends of the brake lines where they enter the master cylinder. Pull the brake lines away from the master cylinder and plug the ends to prevent contamination. Remove the nuts and washers attaching the master cylinder to the power booster. Pull the master cylinder off the studs to remove it.