Honda 01466-S9V-A00 Hose Set, Rear Brake

You can Select Your Vehicle to check if 01466-S9V-A00 fits your vehicle.

To replace a brake hose, follow these steps:1.Clean all dirt away from the ends of the hose.2.Disconnect the brake hose from the brake line by unscrewing the brake line threaded fitting with a flare-nut wrench to protect the fitting corners from rounding off. Then, pull off the U-clip.3.Disconnect the hose from the caliper, discarding the sealing washers on either side of the fitting.4.Using new sealing washers, attach the new brake hose to the caliper.5.To reattach a brake hose to the metal line, insert the end of the hose through the frame bracket, ensuring it's not twisted. Then, attach the metal line by tightening the tube nut fitting securely.6.Install the U-clip at the frame bracket.7.Carefully check to ensure that suspension or steering components do not make contact with the hose.