Honda 72181-T1G-E11ZB Handle, Driver Side (Urban Titanium Metallic)

You can Select Your Vehicle to check if 72181-T1G-E11ZB fits your vehicle.

Raise the window and remove the door trim panel and water shield. From the rear edge of the door, remove the plastic protector cap that hides the lock cylinder bolt, then pull the door lock cylinder straight away from the door handle. Release the clip securing the door latch actuator rod to the outside door handle from inside the door, then remove the outside handle retaining fastener. Pull the rear section of the door handle back to release it, pivot the rear section away from the door to free the front section, and remove the handle.

Remove the release cables from the door cable clips and the three screws securing the door latch to the door. Then slide the latch downward to release the outside latch handle actuator rod. Open the latch protector door on the latch and disconnect the cables from the latch assembly before removing the latch.