Honda 22100-RX0-005 Flywheel

You can Select Your Vehicle to check if 22100-RX0-005 fits your vehicle.

To remove the transaxle, first raise the vehicle and support it securely on jackstands, then proceed to remove the transaxle. If equipped with a manual transaxle, take off the pressure plate and clutch disc, which is also a good time to check or replace the clutch components and pilot bearing. Next, remove the bolts securing the flywheel/driveplate to the crankshaft; if the crankshaft turns, wedge a screwdriver in the ring gear teeth for manual transaxle models or insert a long punch through one of the holes in the driveplate for automatic transaxle models. Carefully remove the flywheel/driveplate from the crankshaft, supporting it while removing the last bolt due to its weight. Clean the flywheel to eliminate grease and oil, inspecting the surface for cracks, rivet grooves, burned areas, and score marks, with light scoring removable using emery cloth. Check for cracked and broken ring gear teeth, laying the flywheel on a flat surface to check for warpage with a straightedge. Clean and inspect the mating surfaces of the flywheel/driveplate and crankshaft, replacing the rear main oil seal if it is leaking before reinstalling the flywheel/driveplate. Position the flywheel/driveplate against the crankshaft, ensuring correct installation with alignment dowels or staggered bolt holes if applicable, and apply thread-locking compound to the bolt threads before tightening them in a criss-cross pattern to the specified torque. The remainder of the installation follows the reverse order of removal.