Honda 19020-RB0-004 Fan, Cooling

You can Select Your Vehicle to check if 19020-RB0-004 fits your vehicle.

Removal for 2008 and earlier models involves removing the radiator. Then, lift up and remove the Cooling Fan Assembly and shrouds from the vehicle. For 2009 and later models, remove the coolant reservoir. Disconnect the electrical connector for the Cooling Fan Assembly and the air conditioning condenser fan. Remove the upper radiator brackets. Remove the fasteners holding the air conditioning condenser fan shroud to the passenger side of the engine compartment and remove the fan and shroud assembly from the vehicle. Remove the fasteners holding the Cooling Fan Assembly to the driver's side of the engine compartment and remove the fan and shroud assembly from the vehicle. For all models, remove the nuts for each fan blade assembly and remove them from their motor shafts. Inspect the fans for cracks, chips or other damage and replace as necessary. Remove the fan motor-to-fan support retaining bolts, then remove the motor. Installation is the reverse of removal. Make sure the fan shrouds seat properly at the bottom. On 2008 and earlier models, refill the cooling system.