Contact Us Live Chat or 1-888-984-2011
My Garage
My Account
Cart
Make sure this part fits

Honda 45251-SZ3-000 Disk, Front Brake (15")

1997-2001 Honda Prelude 45251SZ3000

Customer Questions & Expert Answers (2)
Honda 45251-SZ3-000 Disk, Front Brake (15")
  • Part Description
    Rotor
  • Position
    Front
  • Manufacturer
    Honda
Make sure this part fits
$86.66 MSRP: $122.40
You Save: $35.74 (30%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Honda
    Manufacturer Part Number45251-SZ3-000
    Part DescriptionRotor
    Other NamesBrake Rotor
    Item Dimensions11.5 x 11.5 x 2.4 inches
    Item Weight13.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerHonda
    SKU45251-SZ3-000
    WarrantyThis genuine Honda part is guaranteed by Honda's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Body & Trim Emission & Transmission
    2001 Honda Prelude2 Door Base, 2 Door TYPESHKA 4AT, KA 5MT
    2000 Honda Prelude2 Door Base, 2 Door TYPESHKA 4AT, KA 5MT
    1999 Honda Prelude2 Door Base, 2 Door TYPESHKA 4AT, KA 5MT
    1998 Honda Prelude2 Door Base, 2 Door TYPESHKA 4AT, KA 5MT
    1997 Honda Prelude2 Door Base, 2 Door TYPESHKA 4AT, KA 5MT, KL 4AT, KL 5MT
  • Customer Questions & Expert Answers

    Q:
    Is this part a direct fit for my VIN#? Posted by HondaPartsNow Specialist
    A:
    You can Select Your Vehicle to check if 45251-SZ3-000 fits your vehicle.
    Posted by HondaPartsNow Specialist
    Q:
    How do you remove and install Brake Disc on Honda Prelude? Posted by Customer
    A:
    To remove and install the brake components you need to pull out or use siphon or turkey baster to pull out about half of the brake fluid from the master cylinder, then lift and provide support to the vehicle and after that, remove the tire/wheel assembly. Third, remove the caliper mounting bolts and then unbolt the caliper assembly from the brake rotor by drawing it upward off the brake rotor thus hanging it with a wire to avoid applying stress on the brake flex hose. Subsequently as the caliper body and brake pads are to be dismantled, the caliper bracket mounting bolts are to be loosened and the bracket has to be detached from the rotor. Take out the rotor retaining screws and withdraw the brake rotor straight off the wheel mounting studs, using bolts if the latter is very tight. For installation, push the piston back into the caliper if possible, follow this by fixing the brake rotor to the wheel hub and narrowly screwing tight. Bolt the caliper mounting bracket, position the caliper and pad over the rotor and bracket and fit the mounting bolts. Refill the master cylinder with new brake fluid, replace the tire /wheel assembly and then drop the vehicle. Press the brake pedal and build up pressure to give a firmer feel before any maneuver, Also perform a road test to check how the brakes work. On the 1996-97 Accord, first un-bolt the knuckle assembly, and detach the hub further, take off the splash guard, and the flange bolts before pulling to separate the hub from the brake rotor. Installation is done by reversing the process the spindle nut should be tightened to 181 ft. lbs. radiator nuts to 25 ft. lb. and the wheel lug nuts to 80 ft. During the inspection of the brake part check the rotors for any defects which may include crack or warping of the rotors. Slight scratching is allowed, deep scratching or bowing needs sanding or to be replaced. Solvent cleaning is done before installation to remove whatever protective layer that could be on new rotors. To inspect the rotor safely support the vehicle and then take out the tire/wheel assembly and then measure the run-out, thickness, and parallelism. Run out should not exceed 0.004 inches; you should use a dial indicator to determine the extent of run out. Check up on the thickness of the rotor at several regions and check with the minimum limit and change it if it is below the rates. For parallelism, find the difference between the largest and the smallest measurements; if it is more than 0.0006,'machine' the rotor. When machining leads to a size below the minimum size, then replacement is compulsory.
    Posted by HondaPartsNow Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Honda Part 45251-SZ3-000, the Right Choice

To ensure reliability, purchase Honda part # 45251-SZ3-000 Disk, Front Brake (15"). It is sometimes referred to as Honda Brake Disc. In terms of quality, OEM parts are the wise choice for Honda owners who want to keep their vehicles at peak performance. They are manufactured to follow official strict factory specifications and are made in world-class facilities. They undergo rigorous tests to ensure that they are durable and safe to use. This part fits 1997-2001 Honda Prelude.

HondaPartsNow.com is a leading supplier of genuine Honda parts and accessories such as Honda 45251SZ3000 Disk, Front Brake (15"). When it comes to choosing the right parts for your vehicle, the solution is simple: shop from our wide selection of genuine Honda parts at competitive prices available on HondaPartsNow.com. We prioritize your convenience, 100% satisfaction, and peace of mind by offering a user-friendly catalog, manufacturer-warranted OEM Honda parts, a hassle-free return policy, and swift delivery service.

Why choose Honda Parts Now

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly