Honda 51621-TR0-A23 Damper Unit, Left Front

You can Select Your Vehicle to check if 51621-TR0-A23 fits your vehicle.

Guide the strut assembly up into the fenderwell and insert the upper mounting studs through the holes in the body, then install the nuts. Slide the steering knuckle into the strut flange and insert the two bolts, install the nuts, align the previously made matchmarks and tighten them to the torque. Install the wheel and lug nuts, then lower the vehicle and tighten the lug nuts. Tighten the upper mounting nuts and install the cowl panel cover. Have the front end alignment checked and, if necessary, adjusted.

Fold down the trim panel in the trunk for access to the shock absorber upper mount.

Use a spring compressor to compress the spring sufficiently to relieve all pressure from the upper spring seat, then hold the damper rod with an Allen wrench and remove the upper spring seat and insulator.