Honda 45230-SF1-033 Caliper Assembly, Driver Side (16Cl-13Vn) (Nissin)

You can Select Your Vehicle to check if 45230-SF1-033 fits your vehicle.

To install, the caliper must be cleaned thoroughly and the brake rotor must be checked for grooves or cracks and machined or replaced as necessary. The brake caliper must be removed from the vehicle to overhaul it, and the piston, boot, clip, and seal must be removed from the bore. The brake disc must be raised and supported, the caliper assembly must be removed, and the retaining screw must be removed from the brake rotor to remove it. To install the disc, the reverse of the removal procedure must be followed. The brake disc must be inspected for circular scores, disc run out, and disc parallelism.

The disc brake system consists of brake pads, caliper and rotor (disc).