Honda 52306-TR0-A61 Bush, Rear Stabilizer Holder

You can Select Your Vehicle to check if 52306-TR0-A61 fits your vehicle.

Loosen the rear wheel lug nuts. Raise the rear of the vehicle and support it securely on jackstands, blocking the front wheels to prevent the vehicle from rolling. Remove the rear wheels. If applicable, remove the undercarriage trim panel. Remove the sway bar kit link nuts and the bracket bolts and remove the sway bar kit. Pull the brackets off the sway bar kit and inspect the bushings for cracks, hardness and other signs of deterioration and if the bushings are damaged, replace them. Installation is the reverse of removal. Tighten the fasteners.

Raise the subframe and install the bolts, tightening them. Install the torque rod bolts, tightening them. Connect the stabilizer bar links to the lower control arms. Tighten the nuts. Connect the balljoints to the control arms, tightening the nuts. Install the wheels and lug nuts. Lower the vehicle and tighten the lug nuts. Have the front end alignment checked and, if necessary, adjusted.