Honda 44315-SB2-961 Boot, Inboard (Denso)

You can Select Your Vehicle to check if 44315-SB2-961 fits your vehicle.

To remove and install the halfshaft, first raise and safely support the vehicle. Begin by removing the halfshaft. If replacing the inboard CV-joint boot, secure the halfshaft in a suitable holding fixture for disassembly. Remove the boot bands, cutting them if they are welded, then push the CV-joint boot away from the halfshaft to access the CV-joint. Mark components during disassembly for proper reassembly, then remove the inboard CV-joint and the CV-joint boot. For installation, reverse the removal steps, checking CV-joint components for wear and replacing as necessary, while thoroughly packing the inboard CV-joint and boot with molybdenum disulfide grease and installing new boot bands. If replacing the outboard CV-joint boot, again secure the halfshaft in a fixture, remove the inboard CV-joint and boot without disassembling the outboard CV-joint, then remove the boot bands and the outboard CV-joint boot. For installation, reverse the removal steps, ensuring to thoroughly pack the outboard CV-joint boot with molybdenum disulfide grease and install new boot bands. Finally, install the halfshaft in the reverse order of removal.