Honda 72148-S0A-000 Battery (Cr1616)

You can Select Your Vehicle to check if 72148-S0A-000 fits your vehicle.

For safety reasons, regular vehicle battery maintenance calls for goggles, gloves, petroleum jelly, and baking soda. First, ensure that the engine is off and then disconnect the negative terminal: this will be safe for your servicing purposes. Always charge in a ventilated area away from sparks since hydrogen gas inside the battery makes it highly flammable. Therefore, don't touch it with bare hands and put on your goggles. Cracks or loose connections should be cleaned using baking soda solution if there is any sign of corrosion. When recharging discharged batteries, go for slow-rate charging; chargers that produce high amperage should not exceed 1/10th the battery rating. Rapid emergency charging should be kept to a minimum. If corroded parts are covered with a zinc-based primer after they have been scrubbed clean with baking soda, corrosion can be removed.

While disconnecting a vehicle battery, one should be aware that there are certain systems that need constant power like; alarms, power locks or the control unit memory. Removing the key from the ignition can avoid accidental lock engagement when reconnecting the battery. Memory-saver devices can keep security codes and power on some circuits. To disconnect the battery, first remove the cable from the negative terminal then put back the positive terminal first. Once reconnected, perform Powertrain Control Module idle learn procedure for proper engine idle characteristics.

Be safe when maintaining your vehicle's battery. This means that the engine must be turned off and the negative battery terminal disconnected. Always find a well-ventilated place to position yourself because among the other things you will be handling is sulfuric acid in the battery. While doing so, one should put on safety glasses as well as gloves for personal protection. Check for external problems like corrosion or loose connections and clean with a baking soda solution and use a brush designed for batteries. You need to see that your battery tray and clamp are in good condition. Rinse with a baking soda solution to remove the corrosions. After finding any damaged parts, they should be primed and then painted. Do not use high-amperage chargers or rapid boosts; instead employ a slow-rate trickle charger for discharges and maintaining charge.

The reverse of removal - connect the positive cable first and the negative cable last.

Inspect the battery tray and hold-down clamp.

After disconnecting the battery cables, the battery hold-down bracket should be removed.

It is wise to remove the key or keyless entry fob before disconnecting the battery to prevent accidental locking of the doors.

Yes, battery straps and handlers are available at most auto parts stores for reasonable prices.

It is important to consider certain factors before disconnecting the vehicle's battery because some vehicle systems rely on continuous battery power for uninterrupted operation or to retain control unit memory.

Slow-rate charging with a one- or two-amp trickle charger is recommended for restoring a discharged battery or maintaining its charge, especially in cold weather. Avoid using chargers rated more than 1/10th the amp/hour rating of the battery, and be cautious with rapid boost charges, which can harm batteries in poor condition and should only be used in emergencies.

To remove corrosion on hold-down components and the battery case, use a water and baking soda solution and cover corroded metal parts with a zinc-based primer, followed by paint.

Disconnect the negative battery cable first, then the positive cable and perform a battery load test with a load tester.

Visually inspect the indicator eye on the top of the battery and perform an open voltage circuit test with a digital voltmeter.

A routine preventive maintenance program is crucial to ensure quick and reliable starts for your vehicle.

The battery's electrolyte contains poisonous and corrosive sulfuric acid, so it is important to prevent contact with eyes, skin, or clothing, and never ingest it. Utilize protective safety glasses and gloves when working near the battery, and keep children away from it.

Ensure the replacement battery matches the original in terms of dimensions and specifications.

With caution.

Inspect the plastic battery box for corrosion and clean it if necessary. Also, inspect the metal battery tray for corrosion, remove it if needed, and clean the deposits to prevent further corrosion.

When handling the corrosive sulfuric acid in the battery electrolyte, it is important to exercise caution. This involves wearing protective safety glasses and gloves to protect yourself.